Showing posts with label MIT. Show all posts
Showing posts with label MIT. Show all posts

Monday, March 16, 2009

Nanocapacitors: Ultracapacitor and Uber Battery Rolled Into One

Yes, nanotechnology really is going to be this amazing...

The ultimate electronic energy-storage device would store plenty of energy but also charge up rapidly and provide powerful bursts when needed. Sadly, today's devices can only do one or the other: capacitors provide high power, while batteries offer high storage.

Now researchers at the University of Maryland have developed a kind of capacitor that brings these qualities together. The research is in its early stages, and the device will have to be scaled up to be practical, but initial results show that it can store 100 times more energy than previous devices of its kind. Ultimately, such devices could store surges of energy from renewable sources, like wind, and feed that energy to the electrical grid when needed. They could also power electric cars that recharge in the amount of time that it takes to fill a gas tank, instead of the six to eight hours that it takes them to recharge today.

[...]

Sang Bok Lee, a chemistry professor, and Gary Rubloff, a professor of engineering and director of the Maryland NanoCenter, created nanostructured arrays of electrostatic capacitors. Electrostatic capacitors are the simplest kind of electronic-energy-storage device, says Rubloff. They store electrical charge on the surface of two metal electrodes separated by an insulating material; their storage capacity is directly proportional to the surface area of these sandwich-like electrodes. The Maryland researchers boosted the storage capacity of their capacitors by using nanofabrication to increase their total surface area. Their electrodes work in the same way as ones found in conventional capacitors, but instead of being flat, they are tubular and tucked deep inside nanopores.

The fabrication process begins with a glass plate coated with aluminum. Pores are etched into the plate by treating it with acid and applying a voltage. It's possible to make very regular arrays of tiny but deep pores, each as small as 50 nanometers in diameter and up to 30 micrometers deep, by carefully controlling the reaction conditions. The process is similar to one used to make memory chips. "Next you deposit a very thin layer of metal, then a thin layer of insulator, then another thin layer of metal into these pores," says Rubloff. These three layers act as the nanocapacitors' electrodes and insulating layer. A layer of aluminum sits on top of the device and serves as one electrical contact; the other contact is made with an underlying aluminum layer.

[...]

In a paper published online this week in the journal Nature Nanotechnology, the Maryland group describes making 125-micrometer-wide arrays, each containing one million nanocapacitors. The surface area of each array is 250 times greater than that of a conventional capacitor of comparable size. The arrays' storage capacity is about 100 microfarads per square centimeter.

- Brewskie

Thursday, March 12, 2009

New MIT Lithium-Ion Battery on Par With Ultracapacitors

This from the light of Technology Review:

A lithium-ion battery electrode described this week in the journal Nature can deliver electricity several times faster than other such batteries. It could be particularly useful where rapid power bursts are needed, such as for laser weapons or hybrid race cars.

Test batteries based on the new electrode--developed by Gerbrand Ceder, a professor of materials science at MIT--can be discharged in 10 seconds. In comparison, the best high-power lithium-ion batteries today discharge in a minute and a half, and conventional lithium-ion batteries, such as those in laptops, can take hours to discharge. The new high rate, the researchers calculate, would allow a one-liter battery based on the material to deliver 25,000 watts, or enough power for about 20 vacuum cleaners.

This level of power output would put these batteries on par with ultracapacitors, gadgets that can rapidly discharge power but can't carry much energy for their size, says John Miller, a vice president for systems and applications at Maxwell Technologies, a manufacturer of ultracapacitors, who wasn't involved in the research. The new batteries would store nearly 10 times as much energy as an ultracapacitor of the same size. The combination of small size and extreme power could make the batteries particularly useful for race cars, he says. (Starting this year, new Formula One racing rules will allow race cars to store energy from braking to deliver very brief jolts of acceleration.)

[...]

The fast-discharging materials may also recharge quickly, raising the possibility of cell phones that charge in seconds, Ceder says, but this would require expensive chargers. Ric Fulop, vice president of business development at A123 Systems, a battery maker based in Watertown, MA, that has licensed Ceder's new material, says that it could be useful for hybrids or for delivering the power needed for laser weapons. (Fulop notes that A123 is not developing batteries for the latter application.)


- Brewskie